Butterfly Valve. Difference Between Gate Valve and Butterfly Valve Gate valves : this valve is designed to start and stop the flow of water. It is named for the way that the stopper drops like a gate. The design offers little resistance, and fluid flows unimpeded through the valve. One last thing, gate valves can be set in any directional flow. Butterfly valves : this valve is designed to start, stop, and regulate the flow of water.
It's named for the rotating disc that opens and closes the valve. Because you can partially open the valve, you can control the flow of water. Such valves can easily control flow but do leave some residual material in the pipes. I think you can go at clarksol. From the pressure handling side the gate valves withstand bigger pressures than the butterfly So they differ for the pipeline they are used according ti the average pressure at the line Also the construction of each is different and is related with the max.
Pressure to withstand. The Gate valves are used when a straight-line flow of fluid and minimum restriction is desired. A butterfly valve is a valve which can be used for isolating or regulating flow These valves can be used effectively in freshwater, saltwater, lube oil, and chill water systems aboard ship.
The butterfly valve is light in weight, relatively small, relatively quick-acting, provides positive shut-off, and can be used for throttling.
The butterfly valve has a body, a resilient seat, a butterfly disk, a stem, packing, a notched positioning plate, and a handle. Products By Bayt. Used in large piped systems handling slurries, pulp, semi-solids, powders in bulk, as well as effluents. Ball Ball valves have a relatively restricted resistance to temperature fluctuations, but fare well under moderate pressure differences.
Most widely used for all applications. Metal with soft seats, Teflon, polymer or elastomeric seals. Soft seats are often used in lower temperature settings. Butterfly Butterfly valves find use only in low pressure and low temperature flow systems. Lightweight and short face-to-face dimension, they can be used both for isolation and regulating the flow of material using their characteristic quarter turn rotating action. Widely used for regulating large volumes of liquid and gaseous material.
Disc designs are not advisable for hazardous, hydrocarbon or other inflammable substances. Valves can be operated using manual levers or energized hydraulic or pneumatic actuators Metal with metal or soft seats with polymer or elastomeric seals. Select styles have alternate metal and graphite layers sheets in the seal. Please leave this field empty. It is often used to either fully open up the pipe structure to enable free flow or completely cut off the flow when fully closed.
Operations can be automated using electric actuators or pneumatic handles. Parallel gates come with powered discs, separated using springs or spreading bar.
Available as a solid slab or two-piece expandable wedge slabs, pipeline slabs again can totally shut off or allow bulk discharge of material via pipelines. Suited for larger piped networks, knife valves can be effectively used to regulate or throttle flow under low pressure, as opposed to general use of gate valves.
0コメント