This measurement would need to be 8 feet for soft tipped darts i. Another way to determine the throwing line distance from the face of the dartboard is to take a diagonal measurement.
But find someone to help first. A dartboard should be mounted flush against a backing surface. The backing surface is optional but highly recommended versus mounting the board directly on a wall. Some people use heavy duty anchor screws to mount into drywall. This weight combined with the force of pulling darts from the board on a regular basis makes using anchors in a dry wall seem pretty risky.
If you do use anchors, make sure they are heavy duty metal hangers with significant weight capacity. This includes a center screw, U-shaped hanging bracket, and three spring clips for leveling the dartboard against the wall or backing surface. Just spread them out evenly on the back of the dartboard.
A triangular formation works well. The bracket should be measured out so the bottom of the U-slot sits at 5 feet 8 inches high. That is where the screw on the back of the board will sit.
You then simply slide the board with the screw fitting into the U shaped slot. It should fit snugly against the backing surface with minimal if any movement. If there is more than a little movement, try to tighten the center screw on the board and then slide it back into the bracket. Darts won't always hit a bristle or electronic dart board, so you'll want to place the board on a backboard or inside a cabinet to protect the walls. Consult the dart board user manual for information on what hardware is needed to hang the unit.
To decrease the chance of injury, it's wise to avoid placing the dart board in high-traffic areas. Darts can bounce 8 feet or farther, so make sure nothing breakable is within 2 to 3 feet from either side of the board. An area 5-feet wide and feet long is the minimum suggested playing space. Dart Board Height There are numerous dart board regulations - one of which is dart board height.
Height of a dart board is 5 feet, 8 inches from the floor to the center of the bullseye. Dartboard measurements should be easy to determine.
Hanging dartboards is easy for quality dartboards that are hung from the center. Dart boards that hang from the top will need to be measured from the center of the bullseye to the hanger. The type of floor in the playing area is important. A concrete, stone, or tile floor will break darts or dull the dart points. Steel-tip darts can poke holes in a wood, linoleum, or vinyl floor. Carpet will show wear from continuous dart play.
A dart mat can protect the floor. Plastic Shafts - Inexpensive, and available in many colors, but break fairly easily. Good shafts until you start throwing tight groups and breaking lots of shafts. Materials are usually polycarbonate or nylon, some have replaceable tops for greater longevity. Composite Shafts - Composite type shafts , like the Alamo or Quiver, have plastic bases that thread into the darts , combined with aluminum or other metal alloy tops that hold the flight.
These are excellent shafts , quite durable, and will not vibrate loose as easily as solid aluminum shafts. Generally available with replaceable tops for economy and convenience. Solid Aluminum Shafts - More rigid and durable than Plastic or Composite shafts , in many styles, some with decorative engraved stripes, spirals, etc.
They may tend to vibrate loose, especially on heavier darts. When used with thick flights , such as Dimplex or Nylon, the slots may need to be pried open slightly, with a dart tool or knife blade. Will normally bend instead of breaking when hit; just straighten for more use. Aluminum shafts often vibrate loose when playing, so rubber O-ring lock washers are highly recommended. Basic Rules: In a game of the object is for one player or a team to be the first to reach zero from starting total of In simple terms, after three darts are thrown, the throwing player subtracts the total scored from his current total until he reaches zero.
In order to reach zero each player must finish by throwing a double i. Best Place to Hang a Dart Board. Does Home Depot sell darts? How thick is a dart board? How do you break a dart board untitled game? Break the dartboard. How do you hang a board without nails? Turn your bulletin board face down and use a ruler to measure about 4 inches down from the top edge on either side. Can you hang a dartboard on a door? How do you prevent dart holes?
Can you hang a dartboard with Command Strips? What type of drywall anchor do I need? What are toggle bolts used for? How do you hang a dartboard outside? How do you use hanging anchors? Mark your hanging point with a pencil. Similar Asks.
0コメント